Nuvia
Cancel

Fire-rated mattress N3 M0 HCM 120 EI 240 MatPART

  • Set of mattresses adjusted to the dimensions of the draw chambers
  • Shock-proof
  • Meets the most stringent regulatory requirements (N3)
  • Meets the M0 requirement in tunnels
  • Maintains electrical functions even during and throughout the action of fire.
  • Suitable for small spaces
  • Can be handled by one person and easy to install
  • No danger to humans and the environment
  • N3: HCM 120 and EI 240
  • Four hours: Fire wall for more than four hours (including two hours under an increased hydrocarbon fire)
  • M0: Tunnel requirement
  • MatPART is a flexible prefabricated four-hour fireproof mattress.
  • Dimensions vary according to the size of the room to be protected.
  • With non-combustible materials, the mattress maintains electrical functionality (control power, LV, optical fibre).
  • Can be dismantled and repositioned on request without joints and without the intervention of a technician (firewall degree guaranteed).
  • Time saving during installation: no cutting on site, no breakage during handling
  • Position a 30x30mm galvanized peripheral angle iron a minimum of 11cm from the surface of the concrete plug and fix it with M8 dowels or
  • M8 concrete screws
  • Position a 100x50mm galvanized wire mesh (6mm wire)
  • Position the mattresses on the wire mesh, placing them edge to edge
  • Replace the pads on the surface of the chamber
  • Repeat the operation in reverse order for removal (keep the angle) and put back in place according to the instructions in the chamber
  • Thickness: 50mm
  • Weight: less than 9kg (for a 600×1,000mm mattress)
  • Colour: grey (or other on request)
  • Mass: approx. 14kg/m²
  • Dimensions: according to the needs on-site (made to measure)
  • Guaranteed halogen-free
  • Insulating complex based on fibres and fireproof gel implemented in a M0 fabric cover
  • Applicable in all rail and road tunnels
  • Secures the structure and its power supplies, limits the damage caused by fire
  • Economic savings and limited downtime after a possible disaster
  • Do not walk on the mattress
  • Do not pierce
  • Handle with care
  • Do not expose to bad weather
  • Store in a sheltered place
  • Refer to the product safety data sheet
  • Wear PPE adapted to conditions on-site
  • CERIB 2019 test certificate
Description

MatPART is a flexible mattress N3 M0 fireproof mattress for use in chambers in railway and road tunnels
It protects the power and control cables, and control fibre optic cables from fire for more than four hours continuously, including two hours under an increased hydrocarbon fire (HCM).
Weight and space savings.
Economic and intervention time savings.

This product belongs to the Compart range of protective products for the conventional sector
Interested in this product ? Get in touch with a sales rep.
  • Set of mattresses adjusted to the dimensions of the draw chambers
  • Shock-proof
  • Meets the most stringent regulatory requirements (N3)
  • Meets the M0 requirement in tunnels
  • Maintains electrical functions even during and throughout the action of fire.
  • Suitable for small spaces
  • Can be handled by one person and easy to install
  • No danger to humans and the environment
  • N3: HCM 120 and EI 240
  • Four hours: Fire wall for more than four hours (including two hours under an increased hydrocarbon fire)
  • M0: Tunnel requirement
  • MatPART is a flexible prefabricated four-hour fireproof mattress.
  • Dimensions vary according to the size of the room to be protected.
  • With non-combustible materials, the mattress maintains electrical functionality (control power, LV, optical fibre).
  • Can be dismantled and repositioned on request without joints and without the intervention of a technician (firewall degree guaranteed).
  • Time saving during installation: no cutting on site, no breakage during handling
  • Position a 30x30mm galvanized peripheral angle iron a minimum of 11cm from the surface of the concrete plug and fix it with M8 dowels or
  • M8 concrete screws
  • Position a 100x50mm galvanized wire mesh (6mm wire)
  • Position the mattresses on the wire mesh, placing them edge to edge
  • Replace the pads on the surface of the chamber
  • Repeat the operation in reverse order for removal (keep the angle) and put back in place according to the instructions in the chamber
  • Thickness: 50mm
  • Weight: less than 9kg (for a 600×1,000mm mattress)
  • Colour: grey (or other on request)
  • Mass: approx. 14kg/m²
  • Dimensions: according to the needs on-site (made to measure)
  • Guaranteed halogen-free
  • Insulating complex based on fibres and fireproof gel implemented in a M0 fabric cover
  • Applicable in all rail and road tunnels
  • Secures the structure and its power supplies, limits the damage caused by fire
  • Economic savings and limited downtime after a possible disaster
  • Do not walk on the mattress
  • Do not pierce
  • Handle with care
  • Do not expose to bad weather
  • Store in a sheltered place
  • Refer to the product safety data sheet
  • Wear PPE adapted to conditions on-site
  • CERIB 2019 test certificate
DOWNLOADABLE DOCUMENTS
Product data sheet
Products of the same category : Complex